Inowattio now integrates with Huawei inverters — from homes to utility-scale

Inowattio now integrates end-to-end with Huawei. Users get unified monitoring, sub-second setpoint control for P/Q and export limits, coordinated battery dispatch, and grid-services readiness—scalable from single-phase rooftops to large three-phase and utility plants.
Good news for prosumers, EPCs, and C&I operators: Inowattio now supports end-to-end integration with Huawei’s SUN2000 inverter family. That means unified monitoring, setpoint control, battery dispatch and grid-services readiness across single-phase residential systems and large three-phase plants — all orchestrated from Inowattio’s platform.
What this unlocks
Real-time telemetry & control: sub-second telemetry sampling and closed-loop setpoint control for active power (P), reactive power (Q), cos φ and export limits at device or fleet level.
Battery-aware dispatch: coordinated charge/discharge for hybrid systems (e.g., SUN2000 + LUNA ESS) to maximize self-consumption or deliver flexibility in balancing markets.
Grid-services ready: IEC-104 command intake, MQTT to edge devices, deterministic aggregation and audit-quality reports for TSO/DSO workflows.
Zero-export & curtailment: dynamic export caps and PV clipping for DSO compliance without truck-rolls.
Supported Huawei models by segment
Availability and naming can vary by region; below are the main families and model ranges from Huawei’s official datasheets.
Residential — single-phase (L1 series)
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1
Residential / Small C&I — three-phase (M1, high-current)
SUN2000-3/4/5/6/8/10KTL-M1
C&I — three-phase (M2, high-current)
SUN2000-8/10/12/15/17/20KTL-M2
SUN2000-100KTL-M2
C&I — three-phase (M3)
SUN2000-20/29.9/30/36/40KTL-M3
SUN2000-50KTL-M3
Utility-scale
SUN2000-185KTL-H1
Smart Logger 3000
Typical use cases
Prosumers & communities: dynamic zero-export, time-of-use optimization, battery arbitrage
C&I plants: demand-charge reduction, peak-shaving, P/Q control for grid code compliance, and participation in balancing services
IPP / Utility: string-level reliability with centralized dispatch for ancillary services portfolios
Get started
Whether you operate a 5 kW rooftop or a 5 MW portfolio, Inowattio now gives you control, reporting, and grid-service participation.
→ Book a technical onboarding to map your Huawei invertor into Inowattio and enable secure, real-time dispatch.
Your inverter isn’t listed or you need industrial integration?
We routinely add new device models and connect to industrial systems (IEC-104/61850, Modbus/RS-485, MQTT, OPC UA, SCADA/DCS). Tell us your setup and grid-code requirements by filling out the form—we’ll scope a safe, compliant integration.

Energy communities in Italy (Tuscany): a functional model, still early in operational maturity
Energy communities in Italy, particularly in the Tuscany region, are already implemented and operational, but in a simplified form compared to how the model is often described at EU level. The focus is on speed: rapid formation, clear incentives, and strong local engagement.
Field data shows these communities are still operating mainly as local optimization structures, without real market integration. The difference compared to Romania is not just about timing, but about system architecture.

Energy Communities Become Reality in Romania After ANRE Decision
ANRE takes a major step toward decentralizing Romania’s energy system. The new proposed regulations create, for the first time, a real framework for the emergence of energy communities and local energy markets.

Industrial Renewable Integration Made Simple
Romania’s industry is entering a new energy era. INOWATTIO’s hybrid SCADA–IoT platform connects solar panels, batteries, and industrial consumption into one intelligent system that cuts costs, enhances control, and enables participation in the balancing market. A new standard for efficiency, resilience, and sustainable energy management.
